- Home
- Prices
Prices
Prices will be provided upon request in EURO or USD.
|
Name and equipment of the series |
Unit name |
|
Disk harrow LDN Strong and LDP Strong (mounted /trailed, struts on damping rubber shock absorbers with non-serviced bearing assemblies, tines – cut-out disks Ø 460 mm (9 teeth) (OFAS Italy), strip rollers (for LDN)/STS (for LDP)) |
LDN Strong 20 D (16 tines) |
|
LDN Strong 25 D (20 tines) |
|
|
LDN Strong 30 D (24 tines) |
|
| LDN Strong 35 D (28 tines) | |
| LDN Strong 40 D (32 tines) | |
| LDP Strong 25 D (20 tines) | |
| LDP Strong 30 D (24 tines) | |
|
LDP Strong 35 D (28 tines) |
|
|
LDP Strong 40 D (32 tines) |
|
| LDP Strong 45 D (36 tines) | |
| LDP Strong 50 D (40 tines) | |
| LDP Strong 60 D (48 tines) | |
| LDP Strong 80 D (64 tines) | |
| LDP Strong 100 D (80 tines) | |
|
Disk harrow LDN and LDP (mounted /trailed, spring struts Bellota with non-serviced bearing assemblies, tines – cut-out disks Ø 460 mm (9 teeth) (OFAS Italy), strip rollers (for LDN)/STS (for LDP)) |
LDN-2 (16 tines) |
|
LDN-2,5 (20 tines) |
|
|
LDN-3 (24 tines) |
|
|
LDN-4 (32 tines) |
|
|
LDN-3 (24 tines) |
|
|
LDP-4 (32 tines) |
|
|
LDP-5 (40 tines) |
|
|
LDP-6 (48 tines) |
|
|
LDP-8 (64 tines) |
|
|
LDP-10 (80 tines) |
|
|
Heavy disk harrow LDT (trailed, tines with rubber with non-serviced bearing assemblies, tines - cut-out disks Ø 610 mm (OFAS Italy), roller STS type) |
LDT-2,5 (20 tines) |
|
LDT-3 (24 tines) |
|
|
LDT-4 (32 tines) |
|
|
LDT-5 (40 tines) |
|
|
LDT-6 (48 tines) |
|
|
LDT-8 (64 tines) |
|
|
Cultivator KPS series «3Р» (trailed, 3 rows, shares 305 mm with double coil tines (Italy or Spain), with strip rollers and spring teeth) |
KPS-4MP-3R |
|
KPS-5MP-3R |
|
|
KPS-6MP-3R |
|
|
KPS-8MP-3R |
|
|
Cultivator of «SLOBODA» series (universal four-row, spring tines Hercules 70*12 мм with lancet shares 260 mm (Bellota (Spain)), with strip rollers and a section of spring teeth) |
KPS-4MRP «SLOBODA» |
|
KPS-5MRP «SLOBODA» |
|
|
KPS-6MRP «SLOBODA» |
|
|
KPS-8MRP «SLOBODA» |
|
|
KPS-10MRP «SLOBODA» |
|
|
KPS-12MRP «SLOBODA» |
|
|
Spring harrow ZBR (according to the official technical documentation of the developer JSC «Tochmash» Donetsk) |
ZBR-6 (mounted, 4 sections) |
|
ZBR-9 (mounted, 6 sections) |
|
|
ZBR-12 (trailed, 8 sections) |
|
|
ZBR-15 (trailed, 10 sections) |
|
|
ZBR-18 (trailed, 12 sections) |
|
|
ZBR-24-02М (trailed, 16 sections) |
|
|
Subsoiler «Ripper «SGR» (mounted, tines (Spain)) |
SGR-2,5/5 |
|
SGR-3/5 |
|
|
SGR-3/7 |
|
|
SGR-4/7 |
|
|
SGR-4/9 |
|
|
Stubble cultivators KSR (mounted, working body - compound lancet shares on stands with shear bolts and smooth spherical disks (Italy) on maintenance-free bearing units, strip roller)
|
KSR-2 |
|
KSR-3 |
|
| KSR-4 | |
| Roller mulcher KMP(chopper) | KMP-6 (120 knives, water-filled) |
|
Cultivator KVO (for vertical processing, trailed, tines – 8 and 12 wave disks Ø 560 mm (Italy) on individual two-turn spring struts 35x35 mm with maintenance-free bearing assemblies) |
KVO-3 (furrow - 2,7 m, 15 tines) |
|
KVO-4 (furrow – 3,85 m, 21 tines) |
|
|
KVO-5 (furrow – 5 m, 27 tines) |
|
|
KVO-6 (furrow – 6,15 m, 33 tines) |
|
|
KVO-7 (furrow – 6,95 m, 37 tines) |
|
|
KVO-8 (furrow – 8,10 м, 43 tines) |
|
|
Trailed injection applicator API (CULTAN technology, tines (Germany), computer control and hydraulics (Italy)) |
API-6 (24 tines) |
|
API-9 (36 tines) |
|
|
API-12 (48 tines) |
|
|
API-16 (64 tines) |
|
|
Mounted disk harrow ADNT(disks Ø 660 mm (Bellota), double row tines with elastomer dampers, maintenance-free bearing, strip roller) |
ADNT-2,4 (14 tines) |
|
ADNT-2,7 (16 tines) |
|
|
ADNT-3,1 (18 tines) |
|
|
Heavy trailed disk unit ADPT (disks Ø 660 mm (Bellota), double row tines with elastomer dampers, maintenance-free bearing, strip roller) |
ADPT-2,4 (14 tines) |
|
ADPT-2,7 (16 tines) |
|
|
ADPT-3,1 (18 tines) |
|
|
Mounted disk unit ADN (two-row, disk Ø 660 mm (Bellota) on a separate stand, maintenance-free bearing, strip roller) |
ADN-2,1 (12 tines) |
|
ADN-2,4 (14 tines) |
|
|
ADN-2,7 (16 tines) |
|
|
Trailer disk unit ADP (non-folding frame, two-row, disk Ø 660 mm (Bellota) on a separate stand, maintenance-free bearing, strip roller) |
ADP-2,4 (14 tines) |
|
ADP-2,7 (16 tines) |
|
|
ADP-3,1 (18 tines) |
|
|
ADP-3,5 (20 tines) |
|
|
ADP-3,8 (22 tines) |
|
|
ADP-4,2 (24 tines) |
|
|
ADP-4,5 (26 tines) |
|
|
ADP-5,2 (30 tines) |
|
|
Trailer disk unit ADPS (folding frame, double-row, cut-out disk Ø 660 mm (Bellota) on a separate stand, maintenance-free bearing assembly, strip roller) |
ADPS-4,5 (26 tines) |
|
ADPS-5,2 (30 tines) |
|
|
ADPS-6 (34 tines) |
Prices are for the basic configuration of the units. Optionally, for an additional fee, upon a separate order from the consumer, it is possible to complete the equipment with various types of working bodies, rollers, aggregation units, etc. You can find the description and cost of possible changes below.
List
of optional equipment instead of the basic
(for cultivators of the «SLOBODA» and «3Р» series, LDP, LDT, ADN, ADP and ADPS units)
Modifications and equipment of the rear press rollers:
- tandem roller (strip/pipe, strip/strip, pipe/pipe);
- a skating rink with stacked spring sectors (Italy);
- STS roller («ground–on-ground», Ø 530 mm) – option without additional payment, tandem;
- section of scrapers for a single STS roller (double-sided, steel 65G) with mounting btineets;
- spiral arrangement of working surfaces (strip and tubular roller): single, tandem.
Optional accessories:
- front planning board (tines - levels (Italy), holder with btineets and adjustment mechanisms);
- protective shield on a btineet with an adjustment mechanism (for units of the ANT, LDN, LDP and LDT series)(left + right);
- front chopper roller with btineets (Ø 420 mm, for units of the LDP and LDT series);
- harrow spring section;
- hitch type CAT.2 or CAT.3;
- transport wheels with tires 11.5/80-R15.3 (2 pcs.) (instead of 10/75-R15.3);
- transport wheels with tires 12,5/60-R15.5 (2 pcs.) (instead of 10/75-R15.3);
- front copying wheels (tire 6,5х16) with btineets (2 pcs.);
- front copying wheels (tire 10/75 R15,3) with btineets (2 pcs.).
Additional equipment of cultivators:
- share 200 mm with S-shaped tine 70*12 Bellota (Spain) and a btineet for four-row cultivators KPS series «SLOBODA»;
Complete set with disks (manufactured by OFAS (Italy)) of different diameters for LDN/LDP and LDT units:
- smooth spherical disk Ø 460 mm - option at no extra charge;
- notched spherical disk Ø 510 mm (10 teeth, OFAS Italy);
- notched spherical disk Ø 560 mm (10 teeth, OFAS Italy);
- notched conical disk Ø 460 mm (20 teeth, OFAS Italy);
- notched conical disk Ø 510 mm (20 teeth, OFAS Italy);
- notched conical disk Ø 560 mm (24 teeth, OFAS Italy);
- notched wavy disk Ø 510 mm (20 teeth, 20 waves, OFAS Italy);
- cut-out spherical disk Ø 610 mm (18 teeth, OFAS Italy).
Additional equipment of disk units ADN, ADP and ADPS:
- adjustment of the angle of attack of the tines for ADN/ADP/ADPS.